Digital Angle Finder Protractor for Woodworking, 2-in-1 Angle Finder Ruler for Carpenter/Construction/DIY, 7inch Stainless Steel 360 Degree Angle Gauge Goniometer with Large LCD Display


Digital Angle Finder Protractor for Woodworking, 2-in-1 Angle Finder Ruler for Carpenter/Construction/DIY, 7inch Stainless Steel 360 Degree Angle Gauge Goniometer with Large LCD Display




Features
  • 【2 in 1 Digital Angle Finder】The combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal and external angles. Ideal for measuring all your workshop angles, bevels, miters for crown, trim, drawing, squaring frames, woodworking, setting miter saw blade angles and more.
  • 【Stainless Steel Digital Protractor】The stainless steel material is hard and durable, which can prolong the service time of this protractor. Laser etched measurements offer clear reading and years' usage. The function of automatic shut-off after 6 min saves energy of the battery.
  • 【High Accuracy & 360°Measurement】Accuracy of this digital angle guage is ±0.2 degree. Hinge mechanism on the angle rule allows a full 360 -degrees to measure inside outside and reverse angles.The ruler supports measurement between metric(mm) and imperial(inch), makes it can measure length (0~200 mm/0~7 inch) convenient and accurately.
  • 【LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement,the display could read up-side-down.c
  • 【Easy Operation & Wide Application】Convenient and easy to measure length and angle by only one tool, it can be used to measure all the angles in your workshop, such as checking angle of blade on table saw or accuracy of miter saw, making angle cuts or measurements, trim or wall angle measuring. Great gift for DIY projects,woodworking,decoration,machining, etc.
  • GemRed 82305 Digital Angle Finder Protractor (Stainless steel, 7inch/200mm)





    Features
  • 【2 Functions' Combination】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read.
  • 【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage.
  • 【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm.
  • 【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION.
  • 【Notes】Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPREAR ON BRAND-NEW PRODUCT.
  • Digital Angle Finder Protractor, 2 in 1 Angle Finder Ruler with 7inch/200mm for Woodworking/Carpenter/Construction/DIY Tools (2 Batteries and Carpenter Pencil Included)





    Features
  • 📏【2 in 1 Digital Angle Finder】TBVHOMM protractor has the function of a ruler and a protracting tool. The combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal and external angles. Suitable for woodworking, construction, drafting and other fields.
  • 📏【2 Batteries and Carpenter Pencil Include】It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you a additional battery as a spare, and a carpenter pencil for your friendly use.
  • 📏【Large LCD Display & Accurate Reading】 TBVHOMM digital protractor is equipped with a large LCD display for easy reading; Measuring Range: 0~999.9°; Accuracy ±0.3°; Resolution 0.1°
  • 📏【Lock, Zero, Hold and Reverse angle functions】This protractor can be locked at any angle by rotating the Locking Knob and pressing the HOLD function button will hold the reading. When you take large angle measurements and reverse measurements, long press the Rev button and the display can be read upside down. Zero button can reset the angle measuring tool at any time.
  • 📏【Wide Application】Combining the functions of a digital angle meter and a protractor, it can be used to measure all the angles in your workshop for a wide range of uses, such as checking the angle of a table saw blade or the accuracy of a miter saw, making angle cuts or measurements, trimming or wall angle measurements. A perfect gift for woodworkers, architects, DIY enthusiasts, etc.
  • SanLiang Digital Angle Finder Protractor Ruler Gauge Measure Tool for Woodworking Construction (Stainless Steel 7 inch/200mm)





    Features
  • 【High Accuracy】Accuracy is ±0.3 degree. It is a good choice for woodworking, construction and daily use. Measuring range: about 7inch/200mm and 360 degrees.
  • 【2 in 1】It can be both ruler and protractor which can be used to measure inside/outside angle and length.
  • 【Large LCD display】Large display make it easy to read. Protection degrees of this angle finder is up to IP54.
  • 【Locking function】The angle finder can be locked at any angle.
  • 【Durable Material】Durable stainless steel ruler. Laser etched graduation lines offer clear reading. But the edge of ruler is sharp, please be cautious when using it.
  • Digital Angle Finder - Angle Gauge Level Box - Level Protractor Inclinometer - Table Saw Angle Gauge Measurement Tool With Magnetic Base and Backlight for Woodworking, Construction, Masonry, Machinery





    Features
  • TWO MEASUREMENT MODES & FOUR UNITS: This equipment displays absolute angles and relative angles in degrees, %, mm/m and IN/FT. Turn on the equipment to directly enter the absolute measurement mode, and press the ZERO button to switch to the relative measurement mode.
  • EASY TO READ: The upgrade super-large LCD display with backlight and reversible display has black background and the measured value with green light, which can be clearly read in the environment with sufficient light or dark light; The measured value can be automatically turned over and displayed along with the turning over of the equipment, which is easy to read.
  • CALIBRATION FUNCTION: The equipment has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles. The measuring range is 4×90°; The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so that it can be calibrated by yourself in case of deviation of accuracy caused by various factors. Please refer to the user manual for details of calibration method.
  • POWERFUL BUILT-IN MAGNETIC BASE and V-GROOVE DESIGN: The powerful built-in magnetic base can be easily and firmly connected to any metal surface, including the most common table saw, which is easy to save time and effort to obtain more accurate measurement results; V-groove design can be easily placed on curved surfaces such as pipes.
  • MORE FEATURES: Battery power shortage prompt; Audible buzzer (the alarm will be given within the level of ±1°, and the frequency will change with the distance from the horizontal or vertical position); Automatic turn off after 3 minutes without any operation or movement to extend the battery life; The protection bag with a belt loop is attached to protect the equipment surface from wear and you can carry it anytime and anywhere.
  • GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet





    Features
  • 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory.
  • 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces.
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement.
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes.
  • 【Packing contains】Digital angle gauge*1, 1.5V Alkaline battery*1, storage pouch*1, instruction*1
  • GemRed Digital Angle Finder Protractor (Aluminum, 200mm)





    Features
  • 【Good Choice for Beginners】Ruler and protractor combination for easy measuring. Great gift for woodworker, constructor DIYers etc.
  • 【New Color】Black ruler and white scale make it easier to read.
  • 【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm
  • 【Rounded edge】Protect your fingers
  • 【Locking Function】For read it easily, GemRed angle finder could be locked at any angle.
  • General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One





    Features
  • ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction.
  • SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects.
  • DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool.
  • WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery.
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively.
  • Calculated Industries 7455 AccuMASTER Digital Protractor Angle Finder Ruler for Crown, Trim, Woodworking | 7 Inch Stainless Steel Blade | Hold and Zero Function | Includes Battery, Protective Case





    Features
  • VERSATILE ANGLE MEASUREMENT TOOL doubles as both a digital angle gauge and a protractor for measuring all your workshop angles, bevels, miters for crown, trim, molding, baseboard, squaring frames, general woodworking, setting miter saw blade angles and more.
  • MEASURE 360 DEGREES – pivot allows full rotation in both directions so you can precisely measure inside or outside angles With ease at +/- 0. 3 degree accuracy. Large LCD display Digits make it easy to read.
  • INSTANTLY RESET YOUR ZERO POINT at any position for relative angles. To find relative angle, determine first angle then push the zero button, then measure second angle to see the difference. LCD display Hold lets you freeze a displayed value before moving tool.
  • EASY TO READ stainless steel rulers have permanently etched markings in 16ths and mm's on one and 32nds and mm's on the other for easier, clearer reading of precision measurements in your favorite units and scale.
  • COMES COMPLETE – with protective case, long-life CR2032 3V battery, Manual and Auto-off, clear American-written, large-print user guide and 2-year limited warranty
  • Digital Angle Finder Tool 7 Inch / 180 mm Stainless Steel with Pouch, Digital Protractor Angle Finder for Woodworking Measurement, Angle Measuring Tool by S&F STEAD & FAST





    Features
  • 2-in-1 electronic digital protractor ruler for measuring lengths and angles, both internal and external. Made with high quality stainless steel and with durable etched measurements.
  • Continuous scale on both sides of digital angle ruler so you can measure greater lengths in inches and mm, up to 15 16/32” and 400 mm. Folded length is 219 mm / 8.6”. Angles displayed in degrees and minutes or degrees to 2 decimal places and resolution of 0.05°.
  • With hold function to store measured angle in memory and zeroing button to reset angle finder tool at any time. Automatic power off after 5 minutes. Clear operating instructions provided.
  • Included 3v CR2032 battery and a pouch / case to store and carry your angle tool securely. Great gift for dads, men and women who work in woodworking, construction, engineering.
  • Many uses, for example as miter saw protractor or for checking angle of blade on table saw or accuracy of miter saw, making angle cuts or measurements, trim / wall / corner angle measuring, bending tubing and metal sheets. Caution: This protractor for woodworking has sharp corners. Handle with necessary care.